911 Carrera Cabriolet (997) F6-3.6L (2007)
7.1.1 Remove tie-wrap => Figure 16 -A-.
7.1.2 Release lock => Figure 16 -B-.
7.1.3 Pull plug carrier => Figure 16 -C- out of the connector housing.
7.2
Press socket contact of line BK/RD 0.75 sq., chamber 20=> Figure 17 -A- and socket contact of line BN 0.75 sq., chamber 21 => Figure 17
-B- out of the 32-pin door control unit connector.
7.3
Connect line RD 0.5 sq. from the wire harness (=> Figure 2 -E-).
7.3.1 Remove approx. 15 mm of insulation on line BK/RD 0.75 sq. (=> Figure 18 -A-).