911 Carrera Cabriolet (997) F6-3.6L (2007)
S 8.3.1.3 Phase III - Topcoat finish
S 8.3.1.4 Phase IV - Clear lacquer finish
S 8.3.2 Painting GFK/SMC spoilers
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
For GFK spoilers of type 996 Aerokit/GT2/GT3/Turbo, special insulation is required in areas with adhesion seams. These areas must therefore be
insulated twice using Standox(R) 2K Nonstop Primer Filler.
-
Primer filler and clear lacquer do not need to be elastic-rendered for this component.
S 8.3.2.1 Phase I - Preparation
S 8.3.2.2 Phase III - Topcoat finish