911 Carrera Cabriolet (997) F6-3.6L (2007)
Base surfaces:
-
Blends in transition areas in the basecoat creep zone
-
Absorbs spray mist in the edge zone
NOTE:
-
Raw material base: Physically-drying special resin
-
Flash point: 25° C/77° F
-
Spec. weight: 0.87 g/cm3
-
Solid content: 8.0% weight/5.8% vol.
-
Theoretical yield: 7.0 m2/ltr. with a dry coat thickness of 10 microns
-
Clean equipment after use with cleaning thinner
VOC value:
-
800 g/l
S 9.10.2.1 Processing
NOTE:
-
Supplied ready to spray.
-
Further details: -> S 7 "Spot-repair procedures" and -> S 8.1 "Spot repair".
S 9.10.3 Standohyd(R) Stone Chip Primer
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
-
Highly-elastic stone chip primer
Properties:
-
Water-dilutable
-
Can be painted over
-
Can be sprayed textured or smooth
Base surfaces:
-
Hardened paintwork, sanded
-
Primed and filled base surfaces, sanded
-
Polystyrene
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 6.1
-> S 9.2.2
NOTE:
-
Raw material base: Water-dispersable copolymer, corrosion inhibition pigments
-
Flash point: 99° C/210.2° F
-
Spec. weight: 1.34 g/cm3
-
Solid content: 63.1% weight/49.8% vol.
-
Theoretical yield: 5.0 m2/ltr. with a dry coat thickness of 125 microns
-
Rinse equipment before and after use with Standohyd(R) Demineralized Water
-
Clean again with cleaning thinner
VOC value:
-
65 g/l
NOTE: