911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-932002.png)
2. Loosen both fastening nuts -1-, release the electric plug connection -2- and unplug from control unit.
3. Pull motor with driving mechanism to the rear out of the console.
4. Loosen the two hexagon-head threaded bolts -3- and remove.
5. Remove motor for convertible-top compartment lid drive -4-.
Installing motor for convertible-top compartment lid drive
1. Grasp convertible-top compartment lid above the brake light and pull up and back until it is fully open.
The potentiometer must be set to 6.2 kohm before installing the motor.
2. Slide potentiometer onto shaft of the motor and note position of lug -A- on motor; do not clip potentiometer to the motor.
