911 Carrera Cabriolet (997) F6-3.6L (2007)
NOTE: Only for removal of the rear left hardtop locking mechanism.
1. Position hardtop locking mechanism -2- on the hardtop body and screw down with the fastening screws -3-. Tightening torque -] Tightening
torque: 10 Nm (7.5 ftlb.)
2. Screw in fastening screw -1- for rear hardtop locking mechanism by hand and then tighten to specified tightening torque -] Tightening torque: 46
Nm (34 ftlb.).
3. Check fastening clips, replacing if necessary. Clip in trim panel -1-.
NOTE: Only for removal of the rear left hardtop locking mechanism.
4. Rivet flat plug -2- of wiring harness with a 3.2 mm tubular rivet -3- to the hardtop body -1- and connect the electric plug connection for the rear
window heating -4-.