911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Unscrew the four fastening screws -1- and remove backrest side support -2-.
Removing motor for backrest adjustment
1. Unclip inner spring for backrest frame -1- at the drive shaft -2- (-arrows B-) and swivel it upwards (-arrow C-).
2. Turn plug connection -3- approx. 90 ° anti-clockwise -arrow D- and remove it from the backrest frame -arrow E-.
3. Release plug connection -3- (-arrows a-) and disconnect it -arrows F-.
4. Unscrew the two fastening screws -1- and remove motor for backrest adjustment -2-.