911 Carrera Cabriolet (997) F6-3.6L (2007)
Installing support for left backrest side part
NOTE: Observe hose routing.
In vehicles with lumbar support, make sure the hoses are routed correctly in the area of the backrest side support.
1. Insert support for backrest side part -2- and secure with the four fastening screws -1-.
2. Route wire harness for airbag -1- as shown behind the backrest side part support -2-.
Subsequent work
1. Install right air cushion for backrest. Refer to Removing and installing air cushion for backrest
2. Install cushion carrier for front backrest. Refer to Removing and installing cushion carrier for front backrest
Removing and Installing Motor For Rear Vertical Adjustment
Removing And Installing Motor For Rear Vertical Adjustment