911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Connect the removed seat to the vehicle's wiring harness via test cable 9745 and test cable 9745/1.
2. Connect electric plug to control module trim panel. Refer to Removing and installing control module trim panel
3. Connect the battery. Refer to IN -Work instructions after disconnecting the battery
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable 9745 and test cable 9745/1.
Subsequent work
1. Install cover for left backrest. Refer to Removing and installing cover for backrest
2. Install padding for front backrest. Refer to Removing and installing padding for front backrest