911 Carrera Cabriolet (997) F6-3.6L (2007)
2. Pull off protective film and stick on insulation for top of rear wall -2- in the marked area.
3. Heat up insulation for rear wall at the bottom -1- and top -2- using a Leister Elektron hot-air gun and press on securely using a rubber roller.
Installing sound absorber for firewall lid
NOTE: The fastening points must remain accessible when positioning the sound absorbers (insulation).
1. Pull off protective film and stick insulation for firewall lid -1- to the firewall lid -2-.
Replacing Sound Absorber (Insulation) For Wheel Housing
Replacing Sound Absorber (Insulation) For Wheel Housing
Preliminary work
1. Remove accessories close to the sound absorber (insulation).
NOTE: The sound absorbers (insulation) must always be replaced if they are damaged or cracked.
2. Remove sound absorber (insulation).
3. Remove all adhesive residue on the body/accessories and clean with cleaning solution.
Installing sound absorber (insulation) for wheel housing