911 Carrera Cabriolet (997) F6-3.6L (2007)
7. Remove solenoid hydraulic valves -2- (NVS and VHS).
8. Remove spark plugs.
9. Remove oil suction pump for cylinders 1 - 3. Unscrew four Torx screws M6 x 20 (micro-self-locking), remove oil suction pump, and replace
O-ring and screws.
10. Remove tandem pump for cylinders 4 - 6. Unscrew four Torx screws M6 (micro-self-locking) -1-. Pull off the vacuum line on pump -2-. Remove
pump and replace O-rings and micro-self-locking screws.
Removing camshaft - engine removed
Removing camshafts - engine removed
Caution: Risk of damage due to particles of dirt.
^
Danger of material damage due to blocked oil bores/oil ducts.
-> Absolute cleanliness is essential when working on the engine.
-> Lay removed engine parts on a clean base and make sure to cover them.
-> Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.
1. Turn the engine at the assembly support so that cylinder bank to be worked on stands vertically upwards.