911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-226012.png)
Note: It is advisable to get a second person to assist in inserting the gear carrier into crankcase half 1-3.
8. Insert gear carrier in crankcase half 1-3 with retaining device.
9. Screw in and tighten two additional screws for fastening the gear carrier to cylinder side 1-3, replace O-ring. -Arrows-. -> Tightening torque: 22
Nm (16 ftlb.)
10. Screw in and tighten another cylinder-head screw with spacer sleeve 9613 -Arrow- on the belt pulley side. -> Tightening torque: 20 Nm (15 ftlb.)