911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-249011.png)
8. Replace oil flange seal. Place oil flange in installation position. Screw in the two fastening screws of the oil flange -arrows- and tighten -
Tightening torque: 7.5 ftlb.
9. Fit plastic line between oil mist separator and oil flange.
10. Fit sheetmetal holder between servo lines into rubber mounts -arrow-.
11. Fit air-conditioning compressor: before installing the compressor check whether the aluminium spacer sleeve -arrow- is inserted. Grease and fit
sleeve. Also lay the ground cable before installation.
