911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-252004.png)
8. Check crankshaft flange and crankcase bore for damage.
9. If necessary, clean the crankshaft flange again using the metal-polishing pad. Then, carefully degrease the flange and crankcase bore using a clean,
lint-free cloth that has been soaked in solvent naphtha or acetone. Ventilate this for at least three minutes to prevent the acetone vapors from
destroying the new sealing ring.
Installing crankshaft sealing ring on flywheel side
Installing crankshaft sealing ring (PTFE) on flywheel side
New insert part assembly aid P 9699/2 for special tool insertion tool P 9699.
Component overview of insertion tool
