911 Carrera Cabriolet (997) F6-3.6L (2007)
8. Remove Seeger circlip ring -F- for the solenoid coil with the Seeger circlip ring pliers. Remove the solenoid coil from the compressor housing.
Installing magnetic clutch
INFORMATION: If a new magnetic clutch is installed, the air gap between pressure plate and pulley must be checked with a depth gauge.
1. Place solenoid coil -D- on the compressor housing. The lock pin -G- must engage in the locking hole -H-.
INFORMATION: When installing the Seeger circlip ring, the slanted surface of the Seeger circlip ring must point forward.
2. Position Seeger circlip ring -F- for solenoid coil -D- and fit using Seeger circlip ring pliers.