911 Carrera Cabriolet (997) F6-3.6L (2007)
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Place oil collection pan under the transmission.
3. Remove the underbody panels.
4. Unscrew control screw -2-.
Note
To undo and tighten the cap nut for the charging valve, counter with a ring wrench!
5. Screw off cap nut -1- for the charging valve.
6. Screw connection hose 95071 onto charging valve.
Checking and topping up ATF
Checking and topping up the ATF
^
The transmission must not be in the reduced driving program.