911 Carrera Cabriolet (997) F6-3.6L (2007)
3. Remove motor together with drive to the rear out the bracket.
4. Release both locking hooks and pull the relay carrier up and out of the retaining frame.
Installing relay carrier
1. Engage relay carrier on retaining bracket and screw down with the two fastening screws -1-. Tightening torque: 4.5 Nm (3.5 ftlb.)
2. Place retaining brackets on the body and screw down with the four fastening screws -4- and the fastening nut -5-. Tightening torque: 2.2 Nm (1.5
ftlb.) Tightening torque: 4.5 Nm (3.5 ftlb.)
Installing relay carrier for Cabriolet