911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Unscrew the four fastening screws -4- and the fastening nut -5- and lift the retaining brackets for the DME control module and the relay carrier.
2. Unscrew the two fastening nuts for the relay carrier and disengage the relay carrier from the retaining bracket.
Removing relay carrier for Cabriolet
1. Disengage electric plug connection for microswitch -5- on holder, release -A- and disconnect
2. Loosen the two fastening nuts -1-, release electric plug connection -2- and unplug from control unit.