porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Checking Seat Belts|Page 3946 > < Checking Seat Belts
Page 2
background image

3. Damage type 3

Damage type 3

3.1 Burn marks from cigarettes, or similar.

4. Damage type 4

Damage type 4

4.1 The belt tensioner must always be replaced if it has been triggered. The seat belt is damaged by the deflector -damage type 4-.

Checking automatic belt device (locking effect)

The automatic belt device has two locking functions
-

The first locking function is triggered by pulling the seat belt out quickly (belt extension acceleration).

Test
-

Pull the seat belt out of the automatic belt device with a strong pull.

If no locking effect occurs, the entire seat belt and belt buckle must be replaced.

In the case of faults in the extension or retraction of the seat belt, check whether the locking tab of the automatic belt device is engaged correctly in
the sheetmetal bracket on the body.

-

The second locking function is triggered by a change in the sequence of vehicle movement (vehicle-dependent locking function).

Test
Fasten the seat belt.

WARNING:
Road test on public roads
-

Danger of material damage and injury
-

For safety reasons, this driving test must be carried out on a traffic-free road, so that there is absolutely no danger to other road users.

-

Accelerate the vehicle to 20 km/h (12 mph) and then perform an emergency stop with the foot brake. If the belt is not locked by the blocking
mechanism during the braking phase, the entire seat belt and belt buckle must be replaced.

Checking look and operation of seat-belt buckle

-

Inspect the belt buckle for crack formation and flaking.

In the case of damage, the entire seat belt and belt buckle must be replaced.

Check belt buckle

-

Push the buckle into the belt buckle until it engages audibly. Check whether the lock mechanism has engaged by pulling strongly on the belt strap.

If the belt tongue fails to lock in the belt buckle even just once in at least 5 test procedures, the entire seat belt and belt buckle must be replaced.

Checking belt buckle release

-

Release the seat belt by pressing with a finger on the button on the belt buckle.

Checking Seat Belts|Page 3946 > < Checking Seat Belts