911 Carrera Cabriolet (997) F6-3.6L (2007)
![background image](/porsche/911_carrera_cabriolet_(997)/f6-3.6l/Page-759004.png)
Installing front belt lock
DANGER: Loosen the safety-related threaded joint.
-
Danger of injury if belt lock is not screwed on correctly.
-
Always replace fastening screws for belt lock after customer service and reworking.
-
It is not permissible to make alterations to the microencapsulated screws (e.g. use lubricant, loosen bolts, and screw them down again).
1. Position belt lock -4- and secure using the fastening screw -3-. -] Tightening torque: 50 Nm (37 ftlb.)
NOTE: The electric lead must not be routed too tightly around the seat cushion.
2. Lay wire harness -1- and press into the metal clip -2- (-arrow A-).
3. Press the three individual connectors -3- into the connector socket -1- until they engage firmly.
4. Secure new tie-wraps -2- on connector socket -1-.
5. Attach connector socket to support until it clicks into place.
6. Place wire harness -2- into the two line holders -3- and secure with three new tie-wraps -1-.