911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Install front apron. Refer to Removing and installing front apron
2. Connect the battery. Refer to Work instructions after disconnecting the battery
3. Using the PIWIS Tester 97180, read out the fault memory and erase if required. If further faults exist, proceed in accordance with airbag diagnosis
fault code.
Work in wake of centre airbag sensor
1. Screw in screw fastening seat belt to the body. Refer to Removing and installing front three-point belt - installing
2. Insert sill. Refer to Removing and installing inner sill
3. Install the rear side-panel lining. Refer to Removing and installing rear side-panel lining
4. Installing front seat. Refer to Removing and installing front seat
5. Connect the battery. Refer to Work instructions after disconnecting the battery
6. Using the PIWIS Tester 97180, read out the fault memory and erase if required. If further faults exist, proceed in accordance with airbag diagnosis
fault code.