911 Carrera Cabriolet (997) F6-3.6L (2007)
Power Distribution Module: Service and Repair
Removing and Installing Vehicle Electrical System Control Unit
Removing And Installing Vehicle Electrical System Control Unit
Preliminary work
Preliminary work - vehicle electrical system control unit
Detach relay carrier 1.
Removing vehicle electrical system control unit
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
1. Pull apart the locking tabs -A- for the vehicle electrical system control unit, pull the control unit forward and down with connectors still attached
then pull it out of its holder at the rear.
2. Release both electrical connectors -A- and unplug them.
3. Take out the control unit.