porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Installing Wire Harness For Airbag|Page 3191 > < Installing Wire Harness For Airbag|Page 3189
Page 28
background image

34. Push together plug connection between main wire harness and front end wire harness, right -1-.

34.1. Insert connector socket in the holder and turn anti-clockwise 90 degrees.
34.2. Push together plug connection between front-end wire harness and main wire-harness right -Arrow A-and lock -Arrow B-.

Subsequent work

INFORMATION:  Only in the Cabriolet.

1. Install front headliner.
2. Secure front headliner in windscreen area.
3. Install sunroof motor.
4. Install operator control unit for garage door opener.
5. Install vehicle electrical system control unit.
6. Install relay carrier 1.
7. Install B+ line from power distributor to transmission connection point.
8. Secure fuse box.
9. Install rear side trim panel at left and right.

10. Install left and right scuff plate.
11. Install front seat at left and right.
12. Install heating/fresh-air unit.
13. Install dashboard.
14. Install tank for windscreen washer system.
15. Install front cover.
16. Install front wheel housing liner on left and right.
17. Install front-end control unit.
18. Install trim panels for luggage compartment.
19. Install loudspeaker amplifier.
20. Install navigation unit with retaining frame.
21. Install CD changer.
22. Install plenum panel cover.
23. Install battery.

Installing Wire Harness For Airbag|Page 3191 > < Installing Wire Harness For Airbag|Page 3189