911 Carrera Cabriolet (997) F6-3.6L (2007)
20. Press cap onto the connector housing until it is felt to engage.
21. Secure wire harness with a new tie-wrap -arrow- to the connector housing.
22. Route the new wire harness along the main wire harness, guide it through existing cable ducts and tie it to the main wire harness using tie-wraps.
INFORMATION: Allocation of lines - see wiring diagram.
23. Plug new line into the contact strip until the contact is felt to engage.
24. Push connector guide onto the connector until it is felt to engage.