911 Carrera Cabriolet (997) F6-3.6L (2007)
Preliminary work
1. Disconnect battery.
2. Remove front seat at left and right.
3. Remove left and right scuff plate.
4. Remove rear side trim panel at left and right.
INFORMATION: Only in the coupe.
5. Remove C-pillar trim panel.
6. Removing rear wall trim panel.
7. Remove trim panel for seat well.
8. Remove relay carrier.
INFORMATION: Only in the Cabriolet.
9. Remove frame for roll-over protection system.
INFORMATION: Only in the Cabriolet.
10. Remove rear window lifter.
INFORMATION: Only in the Cabriolet.
11. Remove roll-over bar.
12. Remove auxiliary brake light.
13. Remove rear light at left and right.
14. Remove rear spoiler.
15. Remove air cleaner housing.
16. Remove reservoir.
17. Remove rear underbody cover.
INFORMATION: Only for vehicles with tyre pressure monitoring
18. Remove rear wheel housing liner.
Removing rear wire harness
Exposing rear wire harness