911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-688004.png)
Installing antenna for tire pressure monitoring system
Installing antenna of front tire pressure monitoring system
1. Insert plug until it is felt to engage.
2. Insert antenna of tire pressure monitoring system into holder -Arrow A- and secure with fastening screw -1-. --> Tightening torque: 1.5 ftlb.
Installing antenna of rear tire pressure monitoring system
Note
When replacing antenna of rear tire pressure monitoring system, the holder must also be replaced.
1. Clip new holder -1- in antenna of tire pressure monitoring system until it is felt to engage in the locking tab -arrows-.
2. Insert plug until it is felt to engage.
