911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-457003.png)
Note
Protect drive shafts against mechanical damage (e.g. with a rubber hose which has been cut open).
4. Fit drive shaft on transmission side. To do this, screw in the six Allen screws joining drive shaft and transmission flange and tighten screws.
Subsequent work
Subsequent work
1. Fit right rear wheel.
2. Check transmission oil level in the final drive and top up if necessary.
3. Fit the underbody panel.
4. Lower the vehicle.