911 Carrera Cabriolet (997) F6-3.6L (2007)
Axle Nut: Specifications
Rear Suspension
Tighten axle nut (drive shaft to wheel bearing housing) if it was removed (vehicle lowered, brakes operated by 2nd fitter).
Tightening torque .......................................................................................................................................................................... 460 Nm (340 ftlb.)
Front Suspension
Tighten the central nut at the wheel carrier or, with the 911 Carrera 4/911 Turbo, the drive shaft fastening at the side of the wheel to 460 Nm (340
ftlb.). Actuate the brake while doing this.