911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-516001.png)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Right-Hand Halfshaft Flange
WM 392219 Removing and installing sealing ring for right-hand halfshaft flange
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panel.
3. Remove right halfshaft flange.
Removing sealing ring for halfshaft flange
Removing sealing ring for halfshaft flange
1. Lever the sealing ring out of the transmission.
Installing sealing ring for halfshaft flange
Installing sealing ring for halfshaft flange
1. Screw M10 x 30 hexagon-head bolt into side A of Pressure piece 9734.