911 Carrera Cabriolet (997) F6-3.6L (2007)
Fitting cover section
NOTE: If the cover section is removed from the rear window undamaged, it can be re-used.
1. Attach cover section -9- to the rear window.
Installing rear window
Preparing 2-component adhesive for processing
NOTE:
-
The adhesive has an open time of -15 min-, which means that the bonding material must be applied and the car window must be assembled within
this period of time.
-
In order to ensure that the substance is completely mixed, apply a 30 mm long adhesive bead of fresh adhesive to a piece of cardboard before
processing.
1. Preparing 2-component adhesive for processing. Refer to Processing of Porsche 2-component window bonding agents.
Applying adhesive on the rear window
NOTE: When applying the adhesive, it is essential to ensure that the adhesive bead overlaps by approx. 30 mm at the beginning and at the end.
1. Using bonding gun -A- apply 2-component adhesive to the rear window along the seal -3- in the form of a triangular bead with the dimension -X=
ca. 15 mm- -Y= ca. 8 mm-.
Inserting rear window into the hardtop body