911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-1074010.png)
4. Clip in lining -4- at the sides and at the rear on the hardtop body -5-.
5. Clip hardtop locking element trim panel -3- on the left and right.
6. Insert centring journal -2- on the left and right, screw in the fastening screw -1- und using torque -] Tightening torque: 7.5 ftlb.
Subsequent work
Install hardtop. Refer to Removing and installing hardtop