911 Carrera Cabriolet (997) F6-3.6L (2007)
3. Remove metal clips.
3.1. Insert a plastic wedge under the metal clip -1- (-arrow A-) and lift it.
3.2. Press out the metal clip -1- using a screwdriver -arrow B-.
4. Remove rear window.
4.1. Remove rear window -1- from the hood covering -2- (-arrows-).
Installing rear window
CAUTION: Risk of water leak if rear window is not fitted correctly.
-
Material damage.
-
Metal clips are designed to be fitted only once.
-
Always replace the metal clips after removal.
-
Only fit metal clips using the circlip pliers.
NOTE:
-
Two persons are needed to insert and adjust the rear window.
-
Ensure that the markings -A, B- correspond at the top and bottom.
1. Install rear window.
1.1. Position rear window -1- and aluminium frame -2- on the hood covering -3-.