911 Carrera Cabriolet (997) F6-3.6L (2007)
2. Tighten fastening nuts -arrows- on clamping jaws to secure side window. -] Tightening torque: 8.5 Nm (6.3 ftlb.)±1.5 Nm (±1 ftlb.)
Adjusting the lower stop of the power window unit
NOTE:
-
It is possible to adjust the height of both lower stops, but these should only be adjusted synchronously.
-
The adjustment is only possible when the side window is lowered.
3. Insert hexagon-socket wrench -1- from above. Adjust the height by turning the screws -2-.
4. Insert rear window inner seal -1- into rear side section slot from above -arrow A- and position on the convertible top support or belt guide section.
5. Insert and tighten front and rear fastening screws -2- (-arrows B-). -] Tightening torque: 10 Nm (7.5 ftlb.)