911 Carrera Coupe F6-3164cc 3.2L (1984)
Interior Moulding / Trim: All Technical Service Bulletins
Tonneau Cover - Availability & Service Installation
Subject
Tonneau Cover
Part Identifier N/A
Applies To
911 CABRIOLET
Group
61
Key Points
Procedure for service installation
C
Number
84-04
August 30, 1984
The optional tonneau cover for the 911 Cabriolet is now available through the Pans Dept. for service installation.
Parts required
Quantity Part No.
Description
1
911.561.923.00
Tonneau cover
1
911.561.921.00
mounting parts kit
Installation procedure
-
remove trim covers from upper portion of door (screws located under trim caps)
-
mount brackets and holders on doors in approximate positions shown -slide self-tapping nuts onto holders at front of door
-
cut out 60 mm section of door recess seal for clearance at rear bracket mounting -drill 3.5 mm holes in tops of brackets for installation of bottom
sections of Tenax snaps
Note