911 Carrera Coupe F6-3164cc 3.2L (1984)
1. Raise and support vehicle.
2. Remove wheels and brake pads.
3. Disconnect brake hydraulic line. Using a suitable device, depress and hold brake pedal to restrict flow of brake fluid from reservoir.
4. Remove caliper retaining bolts and caliper assembly.
5. Loosen bleeder valve and carefully blow hydraulic fluid out of caliper.
NOTE:The recommended air pressure for fluid removal is 14 psi.
Removing Caliper Frame
6. Press caliper frame off of mounting frame.
Removing Cylinder From Frame
7. Place a piece of wood in caliper frame to prevent damage, drive brake piston housing off of caliper frame with a plastic hammer applied at
different points on housing.
8. Remove the clamping ring and dust boot.
Removing Piston
9. Support piston on a piece of wood. Using compressed air, push the piston out of the cylinder bore.