911 Carrera Coupe F6-3164cc 3.2L (1984)
Installing Caliper Frame To Mounting Frame
18. Install mounting frame, being careful not to damage slides.
Adjusting Piston With Piston Turning Pliers.
19. Make final 20° adjustment of piston with piston turning pliers.
20. Install caliper and bleed brake hydraulic system.
Four-Piston Fixed Caliper
Never Loosen Or Tighten Bolts
CAUTION:Never separate the two halves of the caliper, the bolts are tightened on yield strength basis when the calipers are assembled. Once the bolts
are loosened, they cannot be reused.
NOTE: Assembled fixed calipers can be serviced, the piston sealing rings, dirt protection rings, and springs plates can be replaced.
