911 Carrera Coupe F6-3164cc 3.2L (1984)
Replacing Dampers And Slides
11. Press out damper in direction of brake hose connection, make sure that bearing surface in housing is not damaged.
12. Coat damper with brake cylinder paste or equivalent.
13. Insert damper in housing from the brake hose connection side, then guide slide from piston side into damper so that it is positioned between the
lips provided for this purpose (arrow=visible lip).
14. Bolt holder to housing. Tighten guide pins to specified torque. Insert brake pads and housing retaining springs.
Floating Frame Caliper
Exploded View Floating Frame Caliper
