911 Carrera Coupe F6-3164cc 3.2L (1984)
Crankshaft: Service and Repair
DISASSEMBLING AND ASSEMBLING CRANKSHAFT
Clamping Crankshaft
Bolt crankshaft on holder P 209 a with bolts, Part No.928 102 151 01. First remove 6 x 16 mm key with a pliers or drill a hole in the holder to take the
key.
Mounting Drive Gear for Clockwise Turning Distributor
If the drive gear is only marked with the Porsche trademark, it must face the pulley when installed in correct position. If the drive gear is marked with an
electrically inscribed "X", the Porsche trademark is not applicable and, in this case, the "X" mark faces the pulley.
If the drive gear is not positioned correctly, the basic timing will deviate by 13° on crankshaft.
Installing Circlip on Crankshaft
Circlips are available in different thicknesses for adjustment of the distributor drive gear's axial play.
Available Circlips:
Part Number
Thickness in mm
Code