911 Carrera Coupe F6-3164cc 3.2L (1984)
Cylinder Liner: Diagrams
Pistons and Cylinders
DISASSEMBLING AND ASSEMBLING PISTONS AND CYLINDERS
1
Cylinder
6
Mark installed position
2
Cylinder base
6
Replace
gasket, 0.25 mm
3
Circlip
6
Pry out Check for correct fit
4
Piston pin
6
Must always remain with matched piston and may not even be used on different piston in same engine. Mark pistons and
pins if necessary, when disassembling and assembling engine.
5
Piston
6
6
Circlip
6
Pry out - Check for correct fit
7
Piston ring
6
Groove 1
8
Piston ring
6
Groove 2
9
Piston ring
6
Groove3
10
Rubber lined spring 6
Groove3