911 Carrera Coupe F6-3164cc 3.2L (1984)
7. Remove blower mounting bolts.
Note: The temperature-operated switch is installed at the top of the oil cooler.
Tightening torque: 30 Nm (22 ftlb)
The temperature-operated switch actuates the blower when the oil temperature reaches 118°C.
Installing
1.
Apply a coat of Optimoly TA to the connections for the oil hoses.
2.
Use a suitable open-ended wrench to counter when tightening the oil-hose connections.
Tightening torque: 80-100 Nm (58-67 ftlb)
3.
Check connections for leaks. The regulator for the front oil cooler must be open for this check (engine-oil temperature above 83°C).
No oil-cooler blower is installed in cars fitted with type 930/26 engines.
