911 Carrera Coupe F6-3164cc 3.2L (1984)
3. Pry out radial oil seal with a large screwdriver. Be careful not to damage contact surface for seal.
4. Remove brake disk from wheel hub and heat wheel hub to 120 - 150 °C (250 - 300 °F).
5. Drive out bearing races, alternating sides, with a punch.
Assembling
Note: Lubricate wheel bearing and seal with multipurpose grease e.g. Shell Retinax A.
1. Heat wheel hub to 120 - 150 °C (250 - 300 °F).