porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Idle Speed > < Making Idle Adjustments - USA|Page 1649
Page 2
background image

a)  A test socket is located on engine central electric board in engine compartment on left-hand side.

Bridge test jacks B and C with a locally made wire.
(This stops function of the idle volumetric control.)

b)  Check and adjust speed with, for example, VAG tester 1367.

Turn control screw (bypass) on throttle housing until specified speed is reached.

5.  Start function of idle volumetric control after completing adjustments (remove locally made wire).

6.  Recheck adjustments, correcting if necessary.

Idle Speed > < Making Idle Adjustments - USA|Page 1649