porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

All Other Service Bulletins for Ignition Cable: > < Spark Plug & Connector - Removal|Page 1691
Page 1
background image

Ignition Cable: All Technical Service Bulletins
Engine Performance - Stalling and Surging At Idle

Subject

DME System

Part Identifier N/A
Applies To

911 CARRERA

1984

Group

28
Key Points

Modification to prevent stalling and surging at idle

(Supercedes P-Circular, Group 28, No. 84-05) 06/15/84

C

Number

84-07

July 16, 1984
Surging or stalling at idle may be caused by spark plug cable induced voltage to the DME/ injection valve harness.

Brackets and securing clips for spark plug cables on cylinders no, 4 and 5 have been introduced in production to maintain sufficient clearance. This
prevents possible current induction.
These additional brackets and clips have been installed in production as of:

^

March 6, 1984

^

Engine no. 64E03573 Brackets and clips can be installed on earlier vehicles, Pads required           Quantity             Part no.

Bracket

2

911.602.187.00

Clip

2

999.651.169.40

CAUTION

Part numbers are for reference only. Always check with your Parts Department for latest parts information.

All Other Service Bulletins for Ignition Cable: > < Spark Plug & Connector - Removal|Page 1691