911 Carrera Coupe F6-3164cc 3.2L (1984)
Clutch Disc: Testing and Inspection
-
Inspect splines. Clutch disc must slide easily on drive shaft in axial direction without radial play.
-
Inspect rivets, springs and torsion elements for tight fit, cracks or damage. Replace disc when in doubt.
-
Inspect clutch linings. If clutch linings are covered with oil, burnt, damaged or worn at spots, install a new clutch disc.
-
Check lining thickness of clutch disc. Clutch disc with riveted linings:
^
Thickness (released) = 8.1 ± 10.3 mm.
^
Wear limit (released) = 6.3 mm with symmetrical wear.
NOTE: Clutch linings cannot be replaced.
-
Check clutch disc with lining for lateral runout about 2 to 3 mm away from outside diameter.
^
Max. permissible lateral runout: 0.6 mm.