911 Carrera Coupe F6-3164cc 3.2L (1984)
3rd, 4th and 5th gear synchronizing parts
E - Split shift band
NOTE: A coat of molybdenum is sprayed on the rough surface of a synchronizer ring. Different loads are applied to both sides of a synchronizer
ring during a shift. Consequently when repairing, the synchronizer ring should always be turned so that the rough side faces the operating sleeve.
A-Circlip
A - Circlip
-
Install circlips.
Circlip for 3rd, 4th and 5th gears must be inserted so that stepped end faces the guide sleeve.