911 Carrera Coupe F6-3600cc 3.6L SOHC (1997)
Designations and notes
Removing and Installing
Removing and installing long halfshaft flange
NOTE: With transmission installed
Removal
1. Remove drive (axle) shaft.
2. Unscrew pan head screws of halfshaft flange using special tool 9330 and pull out flange.
Installation
1. Install the parts in the reverse order of dismantling
2. Replace O-ring.
-
Slightly oil new O-ring.
3. Tighten pan head screws to 23 Nm (17 ft lb).
