911 Carrera Coupe F6-3600cc 3.6L SOHC (1997)
Fluid - A/T: Testing and Inspection
Up To Model Year 1995
The prescribed fluid level is extremely important for perfect functioning of the automatic transmission.
Preconditions for checking:
-
Transmission underbody cladding removed
-
Vehicle must be horizontal
-
Engine operating at idling speed
-
Hand brake applied
-
Selector lever in position "P"
-
ATF temperature 80°C
Check ATF level at 80°C.
NOTE:
-
The ATF capacity was increased by 0.5 liter.
-
The ATF level therefore rises and the 80°C check marks move further up on the oil level tube.
-
Refer to imaginary and dotted lines in the close-up insert.
-
When checking the ATF level, make sure the fluid level is between those two lines (maximum level 15 mm above the 80°C MAX mark
present, lowest level approx. 3 mm below the 80°C MAX mark present).
The exact ATF temperature can be determined with the system tester 9288.
If necessary, top up missing ATF fluid via the quick-fill device (also refer to Fluid Replacement).
From And Including Model Year 1995
