1997 Porsche 911 Carrera Shift Cable Specification
Shift Cable: Adjustments
1. Move selector lever to position "P".
2. Set multi-function switch to position "P".
-
To do so, press actuator lever of switch back up to stop.
3. Set cable length at clevis so that the bolt can be installed free from stress.
4. Check adjustment by shifting through all the gears and confirming that gear is displayed on speedometer.
-
In addition change gate from "D" to "M".
-
This must be possible with one smooth, straight-line movement.
5. Mount snap ring for bolt on actuator lever.