911 Carrera Coupe F6-3600cc 3.6L SOHC (1997)
Identifying Transmission Solenoid Connection By Color Code (Part 2 Of 2)
1. Push the push-on sleeves for the solenoid valves up to the stop.
-
Pay attention to cable colors.
2. Route wiring harness and hang in cable clamps.
3. Place hydraulic control unit on a suitable surface (e.g. transmission jack) at installation height.
4. Insert the socket with new 0-ring so that the flattened side faces upwards.
-
Tighten hexagon nut to: 12 Nm (9 ft lb).
5. Install hydraulic control unit.
6. Connect wiring harness with transmission socket.
-
To do this, carefully insert the connector in the rocket (fits only in one position) and lock by turning the bayonet lock to the right.
7. Install the multi-functional switch and readjust.
