911 Carrera Coupe (996) F6-3.6L (2002)
The following can be read out under the 'Actual values' menu item:
-
Data transmission errors
-
MOST unlock counter
-
Signal strength
-
Supply voltage
NOTE: The 'Reset all coding/transmission counters' function can be used to reset all fault counters that were set for all components to '0'.
Menu item
Function
-
Transmission errors
You can read out the total number of transmission errors from the unlock counter using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Telephone' telematics (optional)' in the 911 (996) PCM2 function selection and confirm with the [>>]
key.
-
Select 'Actual values' in the 911 (996) telephone/telematics (optional) function selection and confirm with the
[>>] key.
-
Select 'Transmission errors' in the 911 (996) telephone/telematics actual values function selection and confirm
with the [>>] key.
-
Read out values from the display field.
-
MOST unlock counter
You can read out the MOST unlock counters using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Telephone/telematics (optional)' in the 911 (996) PCM2 function selection and confirm with the [>>]
key.
-
Select 'Actual values' in the 911 (996) telephone/telematics (optional) function selection and confirm with the
[>>] key.
-
Select 'MOST unlock counter' in the 911 (996) telephone/telematics actual values function selection and
confirm with the [>>] key.
-
Read out values from the display field.
-
Signal strength
You can read out the signal strength using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Telephone/telematics (optional)' in the 911 (996) PCM2 function selection and confirm with the [>>]
key.
-
Select 'Actual values' in the 911 (996) telephone/telematics (optional) function selection and confirm with the
[>>] key.
-
Select 'Signal strength' in the 911 (996) telephone/telematics actual values function selection and confirm with
the [>>] key.
-
Read out values from the display field.
-
Supply voltage
You can read out the supply voltage using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
-
Select 'Telephone/telematics (optional)' in the 911 (996) PCM2 function selection and confirm with the [>>]
key.
-
Select 'Actual values' in the 911 (996) telephone/telematics (optional) function selection and confirm with the
[>>] key.
-
Select 'Supply voltage' in the 911 (996) telephone/telematics actual values function selection and confirm with
the [>>] key.
-
Read out values from the display field.
Drive Links
Drive Links
Drive links of the PCM2 can be activated with this menu item. This allows the function of the drive links to be assessed very quickly.
The following drive links can be activated with the 9588 Porsche System Tester II: