911 Carrera Coupe (996) F6-3.6L (2002)
4.2
Lift up the rubber profile out of the groove in the support tube and loosen the pan-head screw of the clamping claw (Fig. 13, Item A) as far as it
will go. Do not remove the clamping claw.
4.3
Slightly lift up the foot (Item B) of the Roof Transport System and carefully lever out the clamping claw (Item A) from the recess using the
removal tools (Item C).
Note:
Only loosen the pan-head screws in the support tubes (attachment for the feet) if the Roof Transport System will be mounted on another
vehicle.
4.4
Remove the second carrier the same way.